Microsd Card Insertion And Formatting - Oregon Scientific ATCMini Manual De Usuario

Operating Elements -
MicroSD card insertion
1� Insert the MicroSD card until it clicks into place, the metal
contacts should be facing upward.
2� To remove the MicroSD card, push it further into the camera
and it will spring out from the camera for being pulled out.
Insert or remove the MicroSD card only when the camera
is turned off.
MicroSD card formatting
1� Press and hold
2� Press and hold
3� Press after the beep to confirm. The status indicator flashes in blue and red alternately�
4� When formatting is finished, the camera will give two beeps and the status indicator will
light green�
When the available memory of MicroSD card is less than 10%, the status indicator flashes
blue.
ATCMini – 8
MicroSD Card Insertion & Formatting
to turn on the camera.
, and to format the MicroSD card.