Topcom 200 Manual De Usuario página 4

Topcom Microwave Sterilizer 200
4.2 Sterilizing
WARNING
– Never use the sterilizer without 80 ml water in it.
– Adding not enough water may cause damage to the sterilizer and its content.
– Adding too much water may cause that your bottles and teats are not sterilized.
– Do not touch hot surfaces. Use the enclosed pincers
– Do not place the appliance on a hot surface or in a heated oven.
– Do not use bleach or chemical sterilizing solutions or tablets in this product of on products to be
sterilized.
– In combination ovens, ensure that the grill is switched off and has cooled before use.
– Do not overload.
– Do not exceed the microwave time as this may damage the sterilizer and its content.
• Place the sterilizer into the microwave.
• Set the microwave on the desired wattage. Consider the sterilize time.
Microwave Wattage
>1100W
810W - 1100W
<800W
• Wash your hands thoroughly before handling the sterilized items.
• Use the pincers
2
WARNING
– When the sterilizing process is finished, always wait for at least 2 minutes before removing from
the microwave.
– The sterilized items can be extremely hot. Do not remove them with bare hands as this may cause
burn injuries. Use the enclosed pincers
– When removing the lid
injuries.
5 Cleaning
After each use, drain the water from the unit and rinse to prevent lime scale.
Wash the unit in a mild soapy water and rinse thoroughly with clean water.
Dry completely and store in a clean environment.
4
Sterilize time
4 minutes
6 minutes
7 minutes
to remove the hot bottles and teats.
, steam can escape from the sterilizer. Hot steam can cause burn
.
2
Cooling time
2 minutes
2 minutes
2 minutes
!
2
Topcom Microwave Sterilizer 200