RSP APP ON A TABLET. Running an exercise
1. View real-time exercise.
At the top, two symbols represent the type of machine used and the masses, at next to it
is the current series and the number of total series. In the upper central part, data from
each concentric and eccentric movement: repetition, movement type indicator (eccentric or
concentric) and power. In the lower left central part, data from each concentric and eccentric
movement of side A and in the lower right center part, data from each concentric and eccentric
movement of side B: movement type indicator (eccentric or concentric), power, time and
percentage of power in relation to the maximum. Below are two buttons: Change body side (to
switch body side in real time, within the same session), and Stop (end the training).
2. Display the menu. Pressing the icon shown below will display the menu to configure other
machines with their exercises.
When creating a new exercise you can only start it if no other active exercise, if this is the
situation will inform you through a popup message. Next we will see the process.
38