Cleaning The Air Suction Grill; Storage; Troubleshooting; Disposal Of The Device - Silvercrest SHTK 2000 A 1 Instrucciones De Uso

Secador de pelo iónico
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning the air suction grill

GB
MT

Storage

Troubleshooting

Disposal of the device

34
WARNING - RISK OF FIRE!
Clean the air intake grill 3 at regular intervals with a soft brush.
1) Turn the air intake grille 3 slightly so that it can be removed from the hair-
dryer.
2) Clean the openings of the air intake grill 3 with a soft brush.
3) Replace the air intake grille 3 back onto the hair dryer so that the lugs on
the air intake grille 3 engage in the slots on the housing of the hairdryer.
Turn the air intake grille 3 slightly so that it engages and is fi rmly seated on
the housing.
CAUTION - PROPERTY DAMAGE!
First pack and transport the hair dryer when it has completely cooled
down. Otherwise, it could damage other items.
Clean the hair dryer as described in the section "Cleaning".
Retract the cord by pressing the cord retract button 2.
Store the hair dryer at a dustfree and dry location.
Should your hair dryer not function as expected, fi rst remove the plug from the
mains power socket and allow the appliance to cool down for a few minutes.
The appliance is fi tted with an overheating protector!
Should the appliance still not function, consult the service department detailed
under "Service".
Do not dispose of this appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility.Pay heed to the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.
SHTK 2000 A1

Publicidad

Tabla de contenido
loading

Tabla de contenido