Cleaning The Air Suction Grill; Storage; Troubleshooting; Disposal Of The Device - Silvercrest SHTD 2200D A1 Instrucciones De Uso

Cleaning the air suction grill

► Clean the air intake grill
1) Turn the air intake grill
from the hair dryer.
2) Clean the openings of the air intake grill
3) Push the air intake grille
air intake grille
air intake grille
tightly.

Storage

CAUTION - PROPERTY DAMAGE!
► First pack and transport the hair dryer when it has completely cooled
down. Otherwise, it could damage other items.
■ Clean the hair dryer as described in the section "Cleaning".
■ For storage purposes, you can hang the hairdryer up by the suspension
loop
■ Store the hair dryer at a dustfree and dry location.

Troubleshooting

Should your hair dryer not function as expected, first remove the plug from the
mains power socket and allow the appliance to cool down for a few minutes.
The appliance is fitted with an overheating protector!
Should the appliance still not function, consult the service department detailed
under "Service".

Disposal of the device

Do not dispose of this appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Pay heed to the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.
SHTD 2200D A1
WARNING - RISK OF FIRE!
click back onto the recesses on the hairdryer. Turn the
clockwise a little way so that it clicks into place and sits
.
at regular intervals with a soft brush.
a little way anticlockwise so that it can be removed
with a soft brush.
back onto the hairdryer so that the tabs on the
GB │ IE │ 21 ■