Maxi-Cosi Citi CX Manual De Instrucciones página 4

GB
Unfolding the Maxi-Cosi Citi CX (A1-A3)
• Pull both handlebar safety locks at the same time in the direction of the handle and pull the handles upwards
(A1).
• The handlebars are locked into the operating position when you hear a "click" (A2).
• Check to make sure the handlebars are secured properly.
• To lock the Maxi-Cosi Citi CX, move the tensioning handle forward until it is covers the area marked with a red
sticker (A3).
• The footrest should now be completely unfolded (horizontal).
Folding the Maxi-Cosi Citi CX (B1-B3)
• Before folding the Maxi-Cosi Citi CX, release the brake and place the backrest of the seat in an upright position.
• First push the tensioning handle downward (B1) and then in one move pull it back in (see the arrow on
illustration).
• Pull both handlebar safety locks upwards at the same time (B2) and then push the handlebars downwards (B3).
• The handlebars are locked into the transport position when you hear a "click".
• Check this.
• You can lift the folded Maxi-Cosi Citi CX of using the carrying handle at the front.
The brake (C1)
ALWAYS USE THE BRAKE WHEN PARKING THE MAXI-COSI CITI CX, ALSO WHEN AT A STANDSTILL!
• Push down on the red brake pedal on the righthand rear wheel to lock both rear wheels simultaneously (C1-1).
They are now in the parked position. ALWAYS CHECK WHETHER THE WHEELS ARE LOCKED.
• Release the brake by pushing down on the lefthand pedal (C1-2).
Operating the swivelling wheels (D1)
The swivelling wheels on the Maxi-Cosi Citi CX can be locked if you find it easier to push the Maxi-Cosi Citi CX
with locked wheels on a particular type of surface.
• Press down the pedal to lock the swivelling wheels (D1-1). The wheels will automatically be locked once you
start moving forward.
• Lift the pedal upward to release the swivelling wheels (D1-1).
For use with the Dreami (up to 9 kg) and the Maxi-Cosi (for children up to 13 kg) (K1-K2)
• The pushchair seat must be removed (see instructions for removing pushchair seat) and the adapters supplied
must be attached for use with the Dreami and Maxi-Cosi.
Attaching the adapters (E1)
• Stand behind the Maxi-Cosi Citi CX.
• Place the adapter with LH on the lefthand side of the Maxi-Cosi Citi CX.
• Place the flat side of the adapter on the spring-loaded button (E1-1). Press the button with the adapter whilst at
the same time pushing the adapter downward until you hear a click (E1-2). The spring-loaded button will now
pop out of the opening in the adapter.
• Repeat this on the righthand side of the Maxi-Cosi Citi CX.
• Check whether both adapters are firmly secured.
Placing the Dreami on the Maxi-Cosi Citi CX (F1)
• Unfold the Maxi-Cosi Citi CX and check whether it is properly locked, making sure that the adapters are well
secured.
• Place the Dreami on the Maxi-Cosi Citi CX adapters with the foot end between the handlebars (F1).
8
English