ME 3135RC
CLOCK ADJUSTMENT THROUGH RADIO
CONTROL
This appliance is equipped with a receiver capable of receiving the time signal of the
Physikalisch Technische Bundesanstalt Braunschweig ( Germany Central ) admissible
in a radius of 1500 km .
Press and hold the button DOWN (6) of the weather station, radio control symbol
will flash and within 24 hours the time signal vèrrà of radio control.
NOTE
Place the weather station away from equipment that generates magnetic fields which phones,
televisions, etc....
Not all parts of Europe may be able to receive the signal from the radio control.
In this case you need to set the time manually.
ALARM
1.
Press ALM button (7) once to set both Alarm1. Press twice to set the Alarm2.
2.
Press ALM button (7) for three seconds , the display the alarm time starts to
flash.
3.
Press the UP ( 5) or DOWN (6) button to adjust the hour.
4. Press ALM button (7) on the display the alarm minutes start flashing .
5.
Set the minutes using the UP ( 5) or DOWN (6).
6.
To activate the alarm press the UP button (5) to display the bell of Alarm1 or
Alarm2.
7.
To deactivate the alarm, press the UP button (5) until the demise of bell.
SNOOZE & BACKLIGHT
Pressing the LIGHT / SNOOZE (3), you can temporarily turn off the alarm when it
is sounding . After 5 minutes, the alarm sounds again.
You can temporarily turn off the alarm several times.
LOW BATTERY INDICATION
Low battery indication is available for the home unit itself and all of the 3 remote chan-
nels. Replace the batteries and follow the setup procedure in this instruction manual.
BATTERY DISPOSAL
Replace only with the same or equivalent type recommended by the manufacturer.
Please disposal of old, defective batteries in an environmentally friendly manner in
accordance with the relevant legislation.
METEOSTATION
SPECIFICATIONS
Indoor temperature: 0 C to +50 C (+32 F to +122 F)
Humidity Indoor / Outdoor : 20% - 99% RH
Remote Sensor : -20 C to +60 C (-4 F to +140 F)
Channel: max. 3 remote sensors
Transmission range: up to 30 m outdoors, RF 434 MHz
Resolution: 0.1 degree C for temperature , 1 % perl'umidità
Power supply: DC 4.5 V adapter
AAA X 3 pcs. for the main unit
AAA x 2 pcs. for the remote sensor
Precautions for correct disposal of the product.
The symbol shown on the equipment indicates that waste must be disposed of in "sepa-
rate collection" and so the product must not be disposed of together with urban waste.
The user must take the product to special "separate waste collection centres" provided
by local government, or deliver it to the retailer against the purchase of a new product.
Separate collection of waste and subsequent treatment, recycling and disposal opera-
tions promotes the production of equipment with recycled materials and limits negative
effects on the environment and on health caused by improper handling of waste.
Illegal disposal of the product leads to the enforcement of administrative penalties.
WARRANTY
1.
This unit is guaranteed for a period of 24 months from the date of production
printed on the product itself or on label on product.
2.
The warranty is valid only if the unit has not been tampered with. The warrantyis
valid only at authorized TREVI assistance centres, that will repair manufacturing
defects, excluded replacement of labels and removable parts.
3.
TREVI is not liable for damage to people or things caused by the use of this unit
or by the interruption in the use of this unit.
ENGLISH
PAG.5