Optica B-380 Serie Manual De Instrucciones página 17

3. Insert the analyzer into the hole inside the frame
③. (Fig. 9)
4. Put back the head into its original position and
lock the fixing knob.
• The use of the polarization set, although
possible for models B-383FL, B-383LD1
and B-383LD2, is not recommended. The
presence of the analyzer within the optical
path, during the use of fluorescence, causes
a significant reduction in the amount of light
projected on the sample, resulting in difficulty
of observation.
Page 17
③
Fig. 9