Press
the session at any time by pressing
the hang up key.
Common FEATURES to Mode 1 and Mode 2:
- Independent of the LED status, and as long as the screen is not in 'do not disturb' mode (no
incoming messages), upon pressing the F1 key a request is made to view the home´s available
messages. If the line is busy at that time, either with another message or an audio call, an error beep
is sounded.
- If the line is free, the message service will call the monitor that last called, as long as the line is free.
It has no memory.
- If there is an incoming call, either to this monitor or any other installation, the session will close.
Audio is priority over the message service in this version of MessageBox.
2 2
to exit The user may close
If the 'do not disturb' mode: is not selected,
the messages will be received. If this option is
selected, no messages are received.
The screen will return to
its standby status.