Monitor Settings - Fermax LOFT COMPACT COLOR MS-BOX Manual De Instalador

MONITOR SETTINGS

To set up the different monitor parameters, it is necessary to access the configuration mode.
To access configuration mode, press the «
second and a confirmation tone is heard.
Call Volume Setting
When in configuration mode, press the
volume.
Call Tone Selection and Call Cancellation
When in configuration mode, press the «
Now, press the
Image Configuration
Press the button againin tone selection
indicating that the monitor is in image configuration mode.
The monitor has 4 pre-established configurations with a certain level of shine, contrast and
colour.
Press the button «+» to alternate sequentially between the different shine and contrast
configurations.
Press the button «
(2 sec.)
Enter
configuration
mode
«+»
button to change the monitor call tone.
(When you reach the first or last configuration option a warning tone will sound).
-
» to alternate sequentially between the different colour configurations.
» for 2 seconds. The LED blinks once per
«+»
button to select high volume or «
» button again.
. The LED flashes once every two seconds,
-
» to select low
Set call volume
Select call tone and call
cancellation
Image configuration
1 5