6159931360
Issue no: 05
Series: -
MOUNTING
Wall mounting
● Secure the I/O expander as shown below by
using 2 M6 screws (not supplied in the kit).
14.5
Ø6.5
134
4 / 40
Mounting on DIN rail
The I/O expander is designed to be
mounted on an Ω-type DIN rail.
● First position the 2 holders on the I/O
expander as shown below by using the 4
screws supplied in the packing box.
● Clip the I/O expander on the rail.
11/2014