Bluetooth Setup (Bt); Songpal Setup (Songpal) - Sony MEX-XB100BT Manual De Instrucciones

DSPL COLOR (display color)
Sets a preset color or customized color for the
display.
COLOR
Selects from 15 presets colors, 1 customized
color.
CUSTOM COLOR
Registers a customized color for the display.
RGB RED, RGB GREEN, RGB BLUE
Adjustable color range: [0] – [32] ([0] cannot
be set for all color ranges).
ALL COLOR
Sets a preset color or customized color for the
display and buttons.
COLOR
Selects from 15 presets colors, 1 customized
color.
CUSTOM COLOR
Registers a customized color for the display and
buttons.
RGB RED, RGB GREEN, RGB BLUE
Adjustable color range: [0] – [32] ([0] cannot
be set for all color ranges).
SOUND SYNC (sound synchronization)
Selects the color with sound synchronization:
[ON], [OFF].
WHITE MENU
You can display the menu more clearly (white)
without concern for color setting: [ON], [OFF].
START WHITE
When SRC is pressed, the display and buttons on
the main unit turn white once, then change to
the customized color: [ON], [OFF].
MOTION DSPL (motion display)
Shows moving patterns: [ON], [OFF], [SA]
(spectrum analyzer).
AUTO SCROLL
Scrolls long items automatically: [ON], [OFF].
(Not available when the AUX or tuner is
selected.)

BLUETOOTH Setup (BT)

PAIRING (page 8)
PHONE BOOK (page 13)
REDIAL (page 14)
RECENT CALL (page 14)
VOICE DIAL (page 14)
DIAL NUMBER (page 14)
20
GB
RINGTONE
Selects whether this unit or the connected
cellular phone outputs the ringtone: [1] (this
unit), [2] (cellular phone).
AUTO ANSWER
Sets this unit to answer an incoming call
automatically: [OFF], [1] (about 3 seconds), [2]
(about 10 seconds).
AUTO PAIR (auto pairing)
Start BLUETOOTH pairing automatically when
iOS device version 5.0 or later is connected via
USB: [ON], [OFF].
BT SIGNL (BLUETOOTH signal) (page 9)
Activates/deactivates the BLUETOOTH function.
BT INIT (BLUETOOTH initialize)
Initializes all the BLUETOOTH related settings
(pairing information, preset number, device
information, etc.): [YES], [NO].
When disposing the unit, initialize all the
settings.
(Available only while the source is off and the
clock is displayed.)

SongPal Setup (SONGPAL)

Establish and terminate "SongPal" function
(connection).