Unique Features - TECshow ION 740z Manual De Usuario

7. UNIQUE FEATURES

• RDM, stand for "Remote Device Management",
with this function, users can realize remote
control of the device, such as remotely chang-
ing DMX address, reverse pan/tilt setting,
check a lot of useful information such as tem-
perature, power consumption, fan speed. Etc.
Every single device has a unique RDM code
before left factory to distinguish from each
other, usually not suggest users change this
code freely.
• Software upgrade function via DMX cable, if
there is any new firmware for this device come
out, it can be upgraded simply via a software
upgrade box, no need to change any mechan-
ical parts. The upgrade box is not included in
the package, if need any further assistance pls
8. DIMENSIONS DRAWING
just contact authorized dealers.
• Hibernation, the device will enter sleeping
mode if activated after a period of disconnect-
ing DMX signal to save the power consumption,
and will return immediately as soon as the DMX
signal is sent again.
• Display back-up communication IC, there is
a back-up communication IC installed in the
display PCB, so users could replace at once if
the working one is broken, no need to wait long
time from service.
• Display flip, by press up and down button for
more than 3 seconds, the display will flip auto-
matically, this function is useful to read menu
conveniently when device is hanged.
P. 17
English version | Tecshow ION 740z