About This Guide; Extended Warranty - Radiodetection RD7000+ Guía De Usuario

Preface

About this guide

This guide provides basic operating instructions for the RD7000+
locator and transmitter. It also contains important safety information and
guidelines and as such should be read in its entirety before attempting to
operate the RD7000+ locator and transmitter.
It is also highly recommended to register the RD7000+ locator and transmitter
for the free 3 year extended warranty.
This guide is intended as a portable quick reference only. For detailed instructions,
please refer to the RD7000+ operation manual, which can be viewed or
downloaded from the Radiodetection website at: www.radiodetection.com.
Having accessed the Radiodetection website, go to: Downloads > Cable and Pipe
Locators > User Manuals > RD7000+ Operation Manual.
WARNING! Direct connection to live wires is POTENTIALLY LETHAL.
Direct connections should be attempted by fully qualified personnel only!
WARNING! The transmitter is capable of outputting potentially lethal
voltages. Take care when handling the terminals, connection leads and
ground stake, notify other technicians working on the line of the hazard
and guard exposed conductors to prevent accidental contact.
WARNING! This equipment is NOT approved for use in areas where
hazardous gases may be present.
WARNING! When using the transmitter, switch off the unit and
disconnect cables before removing the battery pack.
WARNING! The RD7000+ will detect almost all buried conductors
but there are some objects that do not radiate any detectable signal.
The RD7000+, or any other electromagnetic locator, cannot detect these
objects so proceed with caution. There are also some live cables which
the RD7000+ will not be able to detect in Power mode. The RD7000+ does
not indicate whether a signal is from a single cable or from several in close
proximity.


Extended Warranty

Thank you for purchasing the RD7000+ locator and transmitter.
RD7000+ locators and transmitters are covered by a 1 year warranty.
Customers can extend the warranty to 3 years by registering each product.
Registration and extended warranty are free and once registered users will
be entitled to free software updates through Centros Manager
To be eligible, customers must register each product within 3 months of
purchase.
Upon registration customers will receive confirmation of registration by
email and this email will include a download key, this key will be required
for software updates to your RD7000+ locator and transmitter.
When new software is released, registered users will receive a notification
email that links to the new software download page on the Radiodetection
website.
To register for extended warranty go to:
www.radiodetection.com/extendedwarranty
eCAL
™
eCAL is a novel Radiodetection technique that allows the user to validate the
original factory calibration of the RD7000+ locator, providing the user with the
confidence that the locator continues to meet its original factory calibration.
eCAL also carries out a functional test on the locator providing the user with
the confidence that the locator continues to provide the same performance
as it did when it first left the factory. eCAL can be carried out on site without
the need to return the locator to a service centre, saving time and expense.
Each time the locator passes eCAL, the user can view or print a dated eCAL
validation certificate.
For a more detailed explanation of eCAL, please go to the eCAL section on
page 16.
.
™