Radiodetection RD7000+ Guía De Usuario página 5

Tx-1, Tx-3 and Tx-10 transmitters
1
2
4
5
10 11
8
13
14
15
16
9
3
7 6
12 17
18
19
20

Transmitter features
1. Keypad.
2. LCD.
. Removable accessory tray.
Transmitter keypad
. Power key: Switches the unit on
and off. Opens the transmitter menu.
. ƒ key: Selects frequency.
Menu navigation key.
. Up and down arrows: Adjusts the
output level signal. Scrolls through the
menu options.
. Measure key: Toggles measurement
display between volts and current
or resistance and power (Note:
displayed measurements are based
on the currently selected mode or
the attached accessory, if applicable)
/Opens a submenu.
Transmitter screen icons
. Battery icon: Indicates the battery level.
. Selected operation mode.
10. Standby icon: Appears when the
transmitter is in Standby Mode.
11. Output level: Displays transmitter
output level.
12. Clamp icon: Indicates when a clamp
is connected.
1. External 12V DC icon: Appears when
the transmitter is powered from an
external 12V DC source.
1. Induction indicator: Appears when the
transmitter is in Induction Mode.
1. A-Frame: Indicates when the
transmitter is in Fault-Find Mode
(Tx- and Tx-10 models only)
1. CD Mode indicator: Indicates that the
transmitter is in Current Direction Mode
(Tx-10 model only)
1. Voltage warning indicator: Indicates
that the transmitter is outputting
potentially hazardous voltage levels.
1. Volume icon: Displays the volume level.
1. Pairing icon (Tx-B and Tx-10B only).
For use with RD8000 locators only.
Bluetooth
20. ® icon (Tx-B and Tx-10B
only). For use with RD8000 locators
only.