Installation; Mounting The Display; Mounting The Probe On The Tank - Tecomec GEOline Manual De Uso Y Mantenimento

4 6

4 INSTALLATION

ENG

Mounting the display

The display is supplied with a special support S for
fixing.
Use the channels S1 to screw in the fixing screws
(M6).
Loosen and then tighten knob P1 to adjust the display
position.
Install the display near the driver's seat and in any case
in a position where it is easy to read.
Check that the connection and power cables are in a
safe position that does not compromise their functio-
nality during operation.
S
S1

Mounting the probe on the tank

The probe is usually mounted on the tractor by the
manufacturer.
When in possession of a probe that has not been
already mounted, specific operations are required that
are not given in this manual. In this case please contact
the Geoline customer service department.
27
U s e & M a i n t e n a n c e M a n u a l