Use; Using The Level Indicator Kit - Tecomec GEOline Manual De Uso Y Mantenimento

5 USE

Using the level indicator kit

The probe installed on the machine requires no preliminary adjustment.
Once the cables are correctly connected and the display is switched on, the amount of liquid in the tank will
automatically be shown.
Digital display
This display is fitted with two buttons that allow the
operator to select the type of reading resolution
and the unit of measure.
Button A: choosing the menu (navigation)
- measure resolution menu: 1 L, 5 L, 10 L.
- unit of measure menu: litres, USG, Imp. Gal-
lons.
Button B: selection within each menu
Using the buttons:
- Press button A to view the required menu.
- Press button B to select the required choice.
- Press button A to save the selection and return
to the reading display.
Number of step
This value summarize the amount of the probe
underlevel; it has no function for the normal use
of the device (used only for factory tests).
To activate /anable it :
- Press A button to switch to resolution menu.
- Keep button B pressed for 4-5 sec.
- Press A button twice to return at normal reading.
LED display
LED L1
This LED is always on when the device is
switched on.
LED L2
When LED L2 is off, and only LED L1 is on, the
tank has gone into reserve.
To know the amount of liquid this corresponds to,
consult the tractor instruction manual.
28
U s e & M a i n t e n a n c e
A
Ltr
B
A
A
50%
Ltr
B
0
Ltr
B
50%
0
50%
0
L2
L1
M a n u a l
5 6
ENG
123
185
123
100%
123
185
185
100%
100%