GYS SPOT LIFT PRO Manual De Instrucciones página 12

=
2/ POSITION
Once the operation is done and before starting your work on the vehicle, make sure you have check the stability of
the vehicle on the SPOT LIFT PRO.
3/ LOWERING THE PRODUCT
Take the safety links off.
To get the product down, push down Every time,the joystick comes back to its initial position in order to make sure
that all the operations are intentional.
SAFETY MEASURE
- The SPOT LIFT PRO must be used by trained and authorized people. Moreover, they must have read this user
manual. It must be read carefully before using the SPOT LIFT PRO.
It is forbidden to lift people with this product.
- Check the load, especially when it is going up, while ensuring there is no anomaly. If any problem happens, the
SPOT LIFT PRO must go down as soon as possible and place the vehicle correctly.
- Clean the vehicle supporting surface,
- This product is a lifting tool only. After lifting the vehicle, it must be support by safety links.
- Do not put pads on an area next to airbags sensors.
12
YES
GYS accepts no responsibility in case of damage caused if the operator does not follow the GYS
recommendations.
Before lowering the lift always make sure that no electric cable or objects can be possibly be
caught in the scissors.
SPOT LIFT PRO
=
See p. 31
for more
details
NO
=
EN
=