Technical Specifications - HQ-Power VDLD1 Manual Del Usuario

VDLD1 – SINGLE-CHANNEL DIMMER CONTROLLER
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VDLD1! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
• Be careful when handling dangerous voltage; touching live wires can cause life-threatening
electroshocks.
• Keep this device away from rain and moisture! Never operate or stock the device in a place where splashing
water, rain or moisture can harm it.
• Unplug the device from the mains before cleaning, opening the housing or when not in use.
• This device is designed for indoor use only.
3. Operation
Adjust the light output between 0% and 100% using the fader. Use the FLASH button to flash manually.
4. Replacing the Fuse
Replace a blown fuse with a fuse of the same type and rating (see "Technical Specifications"). Unplug the device
from the mains before replacing the fuse!
1. Remove the fuse holder using an appropriate screwdriver.
2. Remove the old fuse and install a new one.
3. Replace the fuse holder and fix with the screwdriver.
5. Cleaning and Maintenance
1. Disconnect the device from the mains prior to maintenance activities.
2. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
3. There are no user-serviceable parts except for the fuse.
4. Contact your dealer for spare parts or maintenance and service operations.

6. Technical Specifications

Power Supply
Output Power
Current
Fuse
Dimensions
Total Weight
The information in this manual is subject to change without prior notice.
VDLD1
220VAC ~ 250VAC / 50Hz
1,150W
max. 5A
F 6.3A, 250VAC (5 x 20mm) (order code FF6.3N)
65 x 140 x 150mm
0.8kg
3 VELLEMAN