GGP ITALY SHJ 550 Manual De Instrucciones página 19

INTRODUCTION
Dear Customer,
thank you for choosing one of our products. We hope that you will be completely satisfied with this
machine and that it fully meets your expectations. This manual has been compiled in order to provide
you with all the information you need to get acquainted with the machine and use it safely and effi-
ciently. Don't forget that it is an integral part of the machine, so keep it handy so that it can be con-
sulted when necessary, and pass it on to a further user if you resell or loan the machine.
Your new machine has been designed and manufactured in pursuance of current regulations, and is
safe and reliable if used in compliance with the instructions provided in this manual (proper use). Using
the machine in any other way, or non-compliance with the safety specifications relative to use, main-
tenance and repair is considered "improper use" which will invalidate the warranty, relieve the manu-
facturer from all liabilities, and the user will consequently be liable for all and any damage or injury to
himself or others.
Since improvements are periodically made to our products, you may find slight differences between
your machine and the descriptions contained in this manual. Certain modifications can be made to the
machine without prior warning and without the obligation to update the manual, although the essen-
tial safety and function characteristics will remain unaltered. In case of any doubts, please contact your
Retailer. And now enjoy your work!
TABLE OF CONTENTS
1. Identification of the main components ...................................... 2
2. Symbols ..................................................................................... 3
3. Safety requirements .................................................................. 4
4. Preparing to work ...................................................................... 6
5. How to start - Use - Stop the engine ........................................ 7
6. Using the machine ..................................................................... 9
7. Maintenance and storage ........................................................ 10
8. Troubleshooting ....................................................................... 12
9. Technical data ......................................................................... 12
10. Accessories ............................................................................. 12
1
EN