8
Getting started
2 Parts Description
Main Printing Unit
Front
DK Roll compartment cover
3 Installing the DK Roll
1
Press and hold the ON/OFF button to turn
the QL label printer off. Pull up the left and
right levers on the machine under the top
cover, and open the cover.
2
Put the spool into the spool guides in the DK
Roll compartment.
Make sure that the spool arms are inserted firmly in
•
the spool guides on the left and right.
Insert the spool of the DK Roll along the spool guide
•
of the printer.
Rear
LED lamp
ON/OFF button
CUT button
FEED button
<QL-1050>
Power cord
Serial port
USB port
<QL-1060N>
Serial port
USB port
LAN port
Power cord