Bradley BS1019 Manual Del Proprietário página 17

BISQUETTE ADVANCEMENT
To manually advance the bisquette, press the indicator, the indication light will flash blue and the
turntable will rotate ½ turn. Withdrawing the new and discarding the burnt bisquette happens at the
same time. Digital display shows "FEEd" during bisquette advancement. After the bisquette has been
advanced digital display will show "dONE"
After turntable has completed the ½ circle, the turntable reverses slightly and the cabinet internal
temperature will be displayed once again.
Note: Water bowl must be emptied regularly every 2-3 hours. Otherwise bisquette jam can occur.
MEATPROBES 1 / 2
By pressing this indicator, the indication light will flash blue and the 4-digit display will show the
current probe temperature.
*Note: If no confirmation occurs within 5 seconds, the 4-digit display will switch back to the cabinet internal
temperature.
Rotate the rotary dial until the 4-digit display shows the desired target alert temperature.
Press the rotary dial to confirm the setting.
*Note: Adjustment will be cancelled if no confirmation is set within 5 seconds.
When the meat probe reaches the desired alert setting, the indication light will flash blue and alarm
will sound for 1 minute. To cancel the alarm press the rotary dial.
To cancel the meat probe adjustment, press and hold the rotary dial for 3 seconds.
TEMPERATURE F / C
temperature in ℉ or ℃. Pressing the indicator once will change the unit.
By pressing this indicator, the indication light will flash blue and the 4-digit display will show current
℉
*Note: conversion from
℃
to is calculated as follows: (
℃ ℉
) = (Fahrenheit ( )-32) ÷1.8
17 | P a g e