Technical Specifications; Disposal - AEG BSS 4813 Instrucciones De Servicio

English
38
Troubleshooting
Fault Cause
Unit cannot be Unit crashes
operated. and "hangs".
No audio signal Speaker is not
via the Bluetooth paired to the
connection audio source.
Volume too
low
Speaker cannot Pairing does
be connected not work
Audio source
is switched off
Bluetooth is
switched off
at the audio
source.
Bluetooth
version is not
supported.

Technical Specifications

Model: .................................................................................BSS 4813
Power supply: ................................................ 100-240 V~ 50/60 Hz
Power Consumption:................................................................60 W
Protection class: ................................................................................II
Net weight: ................................................................approx. 3.6 kg
Radio component
Frequency range: .................................... FM 87.5 ~ 108 MHz
Bluetooth
Bluetooth support: .......................................................V2.1 + EDR
Range: ..................................................................approx. 15 metres
Transmission frequency: ......................................................2.4 GHz
Protocols: ....................................................................A2DP, AVRCP
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Solution
Disconnect from the
mains for around
5 seconds. Then switch
the unit on again.
Perform a factory reset.
see page 35 "Restoring
the factory defaults"
Check whether a connec-
tion exists. If necessary,
pair the speaker again to
the audio source.
Increase the volume on
the speaker
Increase the volume on
the audio source.
Check whether the audio
source supports the A2DP
protocol.
Switch on the audio
source
Switch on the Bluetooth
function in the audio
source.
Use a different playback
unit.

Disposal

Meaning of the "Wheelie Bin" Symbol
Take care of our environment, do not dispose of electrical
applicances via the household waste.
Dispose of obsolete or defective electrical appliances via
municipal collection points.
Please help to avoid potential environmental and health
impacts through improper waste disposal.
You contribute to recycling and other forms of utilization of
old electric and electronic appliances.
Your municipality provides you with information about col-
lecting points