Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the Default Channel List Mode
You can set All, Added, or Favorite to be the Default List that appears when you press the CH LIST button.
1
Press the MENU button.
Press the 41 or I_ button to select Channel, then press the ENTER button.
Press the A or T button to select Channel List, then press the ENTER button.
Press the A or T button to select Default List Mode, then press the ENTER button.
Press the A or T button to select All, Added, or Favorite, then press the ENTER button.
Press the EXIT button to exit.
The channel list you want to appear when you press the OH LIST button.
'_ A!I: Shows All the Chan_n_eis"wh_en
you_press the OH LIST button on the remote
control.
, Added: ShowsAdded channels when you press OH L!ST button on the remote
control.
, Favorite: Shows Eavorite channels when you press OH L!ST button on the remote
control.
_
Press the CH LIST button on the remote control to bring up the channel lists.
Fine Tuning Analog Channels - Analog
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Pressthe MENU button.
Press the _ or _, button to select Channel, then press the ENTER button.
Press the A or T button to select Fine Tune, then press the ENTER button.
2
Press the A or '!v button. Press the _ or _. button to adjust the fine tuning.
3
To store the fine tuning setting in the TV's memory, press the ENTER button.
To reset the fine tuning setting, press the A or T button to select Reset, then press the
ENTER button.
Press the A or T button to select OK or Cancel, then press the ENTER button.
Press the EXIT button to exit.
_-
Only analog TV channels can be fine tuned.
_-- "_" will appear next to the number of fine-tuned channels.
Publicidad
Capítulos
