Faber CHLOE Serie Instrucciones De Instalación página 27

These can be washed in the dishwasher, and need to be cleaned
whenever the S1 Led comes on or at least once every 2 months use,
or more frequently if use is particularly intensive.
Resetting the alarm signal
• Turn the Lights and the Suction Motor off.
•
Cleaning
•
unit and at the same time pulling downward.
•
• Replace, taking care to ensure that the handle faces
forward.
•
Replacing Activated Charcoal Filter
This cannot be washed or regenerated, and must be changed when
signal, if it has been activated, only appears when the Suction motor
is turned on.
Resetting the alarm signal
• Turn the Lights and the Suction Motor off.
•
Cleaning
•
unlocks from the motor housing and pull off sideways.
•
• CAUTION: When used in recirculation mode, to Reduce the
Risk of Fire and Shock use only conversion kit Model FILTER
1 or FILTER1LL.
LED LIGHTING UNIT
• LED lights must be replaced by Faber factory authorized
service.
5
Z
27