Before You Call For Service - Thermador MicroDrawer MD24JS Guía De Uso Y Cuidado

Ocultar thumbs Ver también para MicroDrawer MD24JS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before you call for service

please check the following before calling for service. it may save you time and expense.
ProBLem
part or all of MicroDrawer™
1
microwave oven does not
operate.
2
Food in microwave oven is
not heated.
3
Microwave oven light does
not work.
4
touch controls will not
operate.
Display flashes.
5
Steam from the vent
6
English 18
PossiBLe CAuse
• power cord of microwave oven is
not completely connected to the
electrical outlet.
• power outage.
• Fuse/circuit breaker doesn't work.
• Microwave oven is in Demo Mode.
• no power to the appliance.
• Drawer controls improperly set.
• Drawer is in Demo Mode.
• Light bulb is loose or burned out.
• panel Lock is on.
• power failure.
• During microwaving, steam may
come from the right side of the vent.
soLution
• Make sure the power cord is tightly connected
to the outlet.
• check house lights to be sure. call your local
electric company for service.
• replace the fuse or reset the circuit breaker.
• See page 16 for how to cancel Demo Mode.
• See SOLUtiOn for prOBLEM 1.
• check if the controls have been properly set.
• See page 16.
• call for service.
• See page 15 to unlock.
• touch StOp/cLEAr pad and reset the clock. if
the microwave oven was in use, you must reset
the cooking function.

Publicidad

Tabla de contenido
loading

Tabla de contenido