Fitting Carrier To Stroller Frame; Releasing Carrier From Stroller Frame; Fitting Adapters To Vista 2014 And Earlier Frame - UPPAbaby MESA Manual Del Usuario

FITTING CARRIER TO STROLLER FRAME

Prior to fitting MESA carrier to stroller frame,
engage brake on stroller and remove toddler seat from frame.
STEP 1: With carrier facing stroller
handle, align carrier handle hubs
with attachment posts on stroller.
STEP 2: Let carrier slide onto
attachment posts. An audible click
indicates proper attachment.
STEP 3: Lift up on car seat handle
to check attachment.
NOTE: Compatible with VISTA 2015+ and CRUZ strollers.

RELEASING CARRIER FROM STROLLER FRAME

STEP 1: Engage and hold the stroller release button on the top of the
carry handle.
STEP 2: Lift the carrier off stroller frame.
38 UPPAbaby MESA Instruction Book
1

FITTING ADAPTERS TO VISTA 2014 AND EARLIER FRAME

Prior to fitting adapter to VISTA 2014 and earlier frame, engage brake
on stroller and remove toddler seat or bassinet from frame.
NOTE: VISTA 2014 and earlier stroller models require adapters for
use with the MESA. Please contact UPPAbaby Customer Service at
TO ATTACH: Place adapters (logo facing out) onto seat attachments and
press until you hear a click.
TO REMOVE: Push down release button on backside of adapter and lift
up from stroller frame.
NOTE: There are 2 adapters, one for the left and one for the
right side of the stroller. The adapters are marked with "L" and "R"
respectively. (The left adapter and left side of the stroller are
NOTE: Indicators should appear green as confirmation of secure
installation. If the indicator symbol is red then the adapter is not
2
secure. Remove the adapter and try fastening it again.
1.844.823.3132 for your free adapter.
ATTACH
determined by the driver's left.
UPPAbaby MESA Instruction Book
REMOVE
39