Display On/Off - Beko GN162420X Manual Del Usuario

Using the product
1. Freezer compartment temperature setting
Pressing the button (
compartment temperature to be set at -18,-19,-
20,-21 ,-22,-23,-24,-18...
2. Economy mode
Indicates the refrigerator is running on energy-
saving mode. This indicator will be active when the
freezer compartment temperature is set at -18 or
the energy-saving cooling is engaged by eco-extra
function. ( )
3.Energy saving function (display off)
If the product doors are kept closed for a long time
energy saving function is automatically activated
and energy saving symbol is illuminated. When
energy saving function is activated, all symbols
on the display other than energy saving symbol
will turn off. When the Energy Saving function is
activated, if any button is pressed or the door is
opened, energy saving function will be cancelled
and the symbols on display will return to normal.
Energy saving function is activated during delivery
from factory and cannot be cancelled.
4. Power failure/High temperature / error
warning indicator
This indicator ( ) will light up in case of
temperature faults or fault alerts. If you see this
indicator is lit up, please see the "recommended
solutions for problems" section in this guide.
This indicator illuminates during power failure, high
temperature failures and error warnings. During
sustained power failures, the highest temperature
that the freezer compartment reaches will flash on
the digital display. After checking the food located
in the freezer compartment press the alarm off
button to clear the warning.
Please refer to "remedies advised for
troubleshooting" section on your manual if you
observe that this indicator is illuminated.
5. Cooler compartment temperature setting
After pressing the button (
compartment temperature can be set to
8,7,6,5,4,3,2.. respectively.
Refrigerator / User Guide
) will enable the freezer
), the cooler
6. Rapid cooling
For rapid cooling , press the button; this will
activate the rapid cooling indicator (
Press this button again to deactivate this function.
Use this function when placing fresh foods into
the cooler compartment or to rapidly cool the
food items. When this function is activated, the
refrigerator will be engaged for 1 hour.
7. Vacation function
When the Vacation function (
cooler compartment temperature indicator displays
the inscription "- -" and no cooling process
will be active in the cooling compartment. This
function is not suitable to keep food in the cooler
compartment. Other compartments will remain
cooled with the respective temperature set for
each compartment.
Press the vacation function button again to cancel
this function. ( )
8. Keypad lock / Keypad lock / filter replacing
alert cancellation
Press keypad lock button ( ) to activate the
keypad lock. You may also use this function to
prevent changing the refrigerator's temperature
settings. The refrigerator's filter must be replaced
every 6 months. If you follow the instructions in
the section 5.2, the refrigerator will automatically
calculate the remaining period and the filter
replacing alert indicator ( ) will light up when
filter expires.
Press and hold the button ( ) for 3 seconds to
turn off the filter alert light.
9. Water, fragmented ice, ice cubes selection
Navigate the water (
fragmented ice (
number 8. The active indicator will remain lit.
10. Ice making on/off
Press the button (
activate (

11.1 Display on/off

When you press the Display off button and when the (
) function is lit, all the other icons of the
25 / 39 EN
).
) is active, the
), ice cube ( ) and
) selections using the button
) to cancel (
) ice-making.
) or