Beko GN162420X Manual Del Usuario página 34

Ocultar thumbs Ver también para GN162420X:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 125
Using the product
When the ice dispenser does not work
properly
If you do not remove ice cubes for a long time, they
will cause formation of ice chunks. In this case, please
remove the ice stock reservoir in accordance with the
instructions given above, seperate the ice chunks,
discard the inseparable ice and put the ice cubes back
into the ice stock reservoir. (Figure 4)
When ice does not come out, check for any ice stuck
in the canal and remove it. Regularly check the ice
canal to clear the obstacles as shown in the figure 5.
Refrigerator / User Guide
When using your refrigerator for the first time or when
not using it for an extended period of time Ice cubes
may be small due to air in the pipe after connection,
any air will be purged during normal use.
Discard the ice produced for approximately one day
since the water pipe may contain the contaminants.
Caution!
Do not insert the hand or any other object into the ice
canal and blade since it may damage the parts or hurt
the hand.
Do not let the children hang on the ice dispenser or the
ice maker since it may cause an injury
To prevent dropping the ice stock reservoir use both
hands when removing it.
If you close the door hard, it may cause water spilling
over the ice stock reservoir.
Do not dismount the ice stock reservoir unless it is
necessary.
33 / 39 EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido