Tabla de contenido
Publicidad
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment.
This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Unauthorized changes or modification to this system can void
the users authority to operate this equipment.
The I/O cables between this equipment and the computing
device must be shielded.
For Canada
CLASS A
NOTICE
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
CLASSE A
AVIS
Cet appareil numérique de la classe A respecte toutes
les exigences du Règlement sur le matériel brouilleur du
Canada.
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Hamamatsu-shi, Shizuoka-ken, JAPÓN 431-2103
NOMBRE DEL MODELO : Consulte el MODELO que aparece en la placa de características.
DIRECTIVAS RELEVANTES : EC LOW VOLTAGE DIRECTIVE (73/23/EEC)
ATENCIÓN
Este es un producto de Clase A. En un entorno doméstico este producto puede producir interferencias de
radio. En este caso, el usuario debería tomar las medidas adecuadas.
Como miembro de E
las directrices E
El International E
promueve el ahorro de energía con la utilización de ordenadores y otros equipos de oficina de bajo
consumo energético. El programa respalda el desarrollo y la difusión de productos con funciones
que reducen eficazmente el consumo de energía. Se trata de un sistema abierto en el que pueden
participar los empresarios voluntariamente. Los productos que pueden participar son equipos de oficina como ordenadores,
monitores, impresoras, facsímiles, fotocopiadoras, escáneres y dispositivos multifuncionales. Sus estándares y logotipos
son uniformes en todos los países.
EC ELECTROMAGNETIC COMPATIBILITY DIRECTIVE (89/336/EEC)
S
, Roland DG Corp. ha determinado que este producto cumple con
®
NERGY
TAR
S
para la eficacia energética.
®
NERGY
TAR
S
Office Equipment Program es un programa internacional que
®
NERGY
TAR
NOTICE
Grounding Instructions
Do not modify the plug provided - if it will not fit the outlet,
have the proper outlet installed by a qualified electrician.
Check with qualified electrician or service personnel if the
grounding instructions are not completely understood, or if in
doubt as to whether the tool is properly grounded.
Use only 3-wire extension cords that have 3-prong groun-
ding plugs and 3-pole receptacles that accept the tool's plug.
Repair or replace damaged or worn out cord immediately.
Operating Instructions
KEEP WORK AREA CLEAN. Cluttered areas and benches
invites accidents.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't
use power tools in damp or wet locations, or expose them to
rain. Keep work area well lighted.
DISCONNECT TOOLS before servicing; when changing
accessories, such as blades, bits, cutters, and like.
REDUCE THE RISK OF UNINTENTIONAL STARTING.
Make sure the switch is in off position before plugging in.
USE RECOMMENDED ACCESSORIES. Consult the
owner's manual for recommended accessories. The use of
improper accessories may cause risk of injury to persons.
NEVER LEAVE TOOL RUNNING UNATTENDED. TURN
POWER OFF. Don't leave tool until it comes to a complete
stop.
Publicidad
Tabla de contenido
