Eco Mode - PRESIDENT RANDY FCC Manual Del Usuario

2.
Press the s or t key (3) to select the
3. Short press the MENU key (4) to validate. The current value blinks.
4. Press the s or t key (3) to deactivate OF, or select between the
6 melodies for the ROGER BEEP from 01 to 06
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default value is OF.
3) KEY BEEP
When the function is activated, a beep sounds when a key is
pressed, by changing the channel etc. "BP" appears on the
display when the function is active.
1. Long press the MENU key (4) to enter the MENU.
the display.
2.
Press the s or t key (3) to select the
3. Short press the MENU key (4) to validate. The current value blinks.
4. Press the s or t key (3) to activate On or deactivate OFthe KEY
BEEP function.
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default value is On.

4) ECO MODE

This function allows to save your battery. The unit goes in standby
mode, LCD backlight off, RX in standby*, etc.
1. Long press the MENU key (4) to enter the MENU.
the display.
2. Press the s or t key (3) to select the
3. Short press the MENU key (4) to validate. The current value blinks.
4. Press the s or t key (3) to deactivate OF the ECO MODE func-
tion or select between the 3 levels 01 (Low), 02 (Middle) and 03
(High).
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default value is 02 (Middle).
17
menu.
appears on
menu.
appears on
menu.