Weka TS40 ANNA Instrucciones De Servicio página 31

6.2 Frequency converter FU6 D/CC (Connect)
Status and error outputs are showed to the user via an LED attached to the frequency converter.
Status display
If there is a status change the green LED on the side of the converter flashes/shines. The number of
pulses after a longer break allows the assignation of the status according to following chart:
Status code Meaning
green off Frequency converter without
voltage supply
green Intermediate circuit is
flashing charged
Frequency converter waits for
machine
Service intervall exceeded
green on Frequency converter ready
Measure
- Switch on main switch
- Use adapter calbe type FU06543
- Check supply cable (cable interrupted)
- Check mains voltage (fuse)
- Wait
- Connect machine
- Check connectors of machine and converter for
dirt and damages
- Bring converter to service station
- Converter can be used
27