Clear Filter Option - Chauvet Professional Epix Tile 2.0 Guía De Referencia Rápida

ÉPIX™ Tile 2.0 QRG

Clear Filter Option

The ÉPIX™ Tile 2.0 comes with a frosted filter installed and an additional clear filter.
The frosted filter can be replaced with the clear filter. Replacing filters requires a #2
size Phillips screwdriver.
To replace the frosted filter with the clear filter, do the following:
1. Stabilize the product on a flat surface.
2. Select one of the two sides of the product that has 8 screws in it.
3. Unscrew all 8 screws.
4. Remove the side of the product.
5. Slide the frosted filter out.
6. Slide the clear filter in.
7. Replace the side of the product.
8. Replace all 8 screws.
The frosted filter should be installed with the shiny side facing toward the LEDs.
5
EN