Getting Started; Step 1: Install The Battery Pack - Leica DX10 Manual De Uso

2
General
2.1
Install the Battery
Pack, step-by-step
12

Getting Started

This chapter repeats — with a few more details — the installation
instructions in the Quick Start Guide that came with your Field PC.

Step 1: Install the Battery Pack

3
2
1
DX10_02
Step Description
1. Carefully unhook and lift up the bottom hook of the hand strap,
as shown in the first picture.
Releasing the hand strap hook too quickly may result in injury
or damage to the display. Use caution when undoing the hook
or when holding the Field PC by its hand strap.
2. Press on the battery door and slide the door latch to the right
to unlock it.
3. Remove the battery door.
4. Insert the battery pack so battery contacts match up.
5. Insert the tabs on the bottom of the battery door into the case
slots. Close the battery door.
6. Press on the battery door. Slide the latch to the left to lock it.
7. Reattach the hand strap.
DX10
1
5
6
4
Getting Started