Hazards Of Use - Leica DX10 Manual De Uso

4.6
Warning
Danger
Caution
Warning
Warning
Warning
Safety Directions

Hazards of Use

The absence of instruction, or the inadequate imparting of instruction,
can lead to incorrect or adverse use, and can give rise to accidents with
far-reaching human, material, financial and environmental
consequences.
Precautions:
All users must follow the safety directions given by the manufacturer and
the directions of the person responsible for the product.
Because of the risk of electrocution, it is very dangerous to use poles /
masts and extensions / staffs in the vicinity of electrical installations such
as power cables or electrical railways.
Precautions:
Keep at a safe distance from electrical installations. If it is essential to
work in this environment, first contact the safety authorities responsible
for the electrical installations and follow their instructions.
With the remote control of products, it is possible that extraneous
targets will be picked out and measured.
Precautions:
When measuring in remote control mode, always check your results for
plausibility.
During dynamic applications, for example stakeout procedures there is a
danger of accidents occurring if the user does not pay attention to the
environmental conditions around, for example obstacles, excavations or
traffic.
Precautions:
The person responsible for the product must make all users fully aware
of the existing dangers.
Inadequate securing of the working site can lead to dangerous
situations, for example in traffic, on building sites, and at industrial
installations.
Precautions:
Always ensure that the working site is adequately secured. Adhere to the
regulations governing safety and accident prevention and road traffic.
If computers intended for use indoors are used in the field there is a
danger of electric shock.
Precautions:
Adhere to the instructions given by the computer manufacturer with
regard to field use in conjunction with Leica Geosystems products.
DX10 21