Non-Interlocked Housing Warning; Laser Safety Notes - Chauvet Scorpion 3D RGB Manual De Usuario

Non-Interlocked
Housing Warning
Laser Safety
Notes
CAUTION! DO NOT operate this device in ways not specified in this User Manual. Failure to follow
the instructions will void the warranty, may damage the product, or injure the user or the audience.
CAUTION! This product cannot be discarded with household waste. Contact your local waste
management service for electronic disposal regulations in your area.
Scorpion™ 3D RGB User Manual (Rev. 1)
• This unit contains high power laser devices internally.
• Do not open the laser housing, due to potential exposure to unsafe levels of laser
radiation.
• The laser power levels, accessible if the unit is opened, can cause instant blindness,
skin burns, and fires.
STOP AND READ ALL THE LASER SAFETY NOTES BELOW
Laser light is different from any other light sources. The light from this product can
potentially cause eye injury if the product is not set up and used properly. Laser light is
thousands of times more concentrated than light from any other kind of light source. This
concentration of light can cause instant eye injuries, primarily by burning the retina (the
light-sensitive portion at the back of the eye). Even if you cannot feel "heat" from a laser
beam, it can still potentially injure or blind you or your audience. Even very small
amounts of laser light are potentially hazardous—even at long distances. Laser eye
injuries can happen faster than you can blink.
DO NOT assume that because some laser entertainment products split the laser into
hundreds of beams and/or that the laser beam is scanned out in high speed, that any
individual laser beam is safe for eye exposure. This type of laser product may use
dozens of milliwatts of laser power(Class 3B levels) internally or before it splits into
multiple beams (Class IIIa levels). Many of the individual beams are potentially
hazardous to the eyes.
DO NOT assume that because the laser light is moving, it is safe. Laser light is never without
risk, nor do the laser beams always move. Since eye injuries can occur instantly, it is critical
to prevent the possibility of ANY direct eye exposure. According to laser safety regulations, it
is not legal to aim Class IIIa lasers in areas where people can get exposed. This is true even
if the laser is aimed below people's faces, such as on a dance floor.
• Do not operate the laser without first reading and understanding all safety and
technical data in this manual.
• ALWAYS set up and install all laser effects so that all laser light is at least 3 meters
(9.8 feet) above the floor on which people can stand.
• After set up, and prior to public use, test laser to ensure proper function. Do not use
if any defect is detected.
• DO NOT use laser if the laser lens is damaged or missing, as this could indicate
damage to the diffraction grating optic, and could allow emission of laser levels
higher than Class IIIa.
• DO NOT point lasers at people or animals.
• NEVER look into the laser aperture or laser beams.
• DO NOT point lasers in areas in which people can potentially get exposed, such as
uncontrolled balconies, etc.
• DO NOT point lasers at highly reflective surfaces, such as windows, mirrors, and
shiny metal. Even laser reflections can be hazardous.
• NEVER point a laser at aircraft; this is a U.S. federal offense.
• NEVER point un-terminated laser beams into the sky.
• Do not expose the output optic (aperture) to cleaning chemicals.
• Do not use the laser if the housing is damaged, open, or if the optics appear
damaged in any way.
• NEVER open the laser housing. The high laser power levels inside of the protective
housing can start fires or burn skin, and will cause instant eye injury.
• Never leave this product running unattended.
• The operation of a Class IIIa laser show is only allowed if the show is controlled by a
skilled and well-trained operator, familiar with the data included in this manual.
• The legal requirements for using laser entertainment products vary from country to
country. The user is responsible for the legal requirements in the location/country of
use.
Page 7 of 60