Setting The Picture Mode; Automatic Brightness Adjustment Function (Light Sensor); Automatic Picture Quality Adjustment Function (For Pc 2 Only) - Sony MFM-HT205 Manual De Instrucciones

Setting the Picture Mode

You can select the Picture Mode using the
in the "Picture" menu.
When you select "Auto," the display automatically adjusts the
screen brightness according to the brightness of the surroundings
(Automatic brightness adjustment function). For more
information, see "Automatic brightness adjustment function
(light sensor)".
For details on using the "Mode" menu, see page 18.
For details on using the button, see below.
Press the button repeatedly.
Each time you press the button, the Picture Mode changes as
follows.
P C 1 / P C 2
G a m e
M o v i e
P C
Au t o
1 0 0
Each indication appears on the screen and Picture Mode is
changed. The menu automatically disappears after about 10
seconds.
Automatic brightness adjustment
function
(light sensor)
This display is provided with a feature to automatically adjust the
screen brightness according to the brightness of the surroundings.
The brightness of the screen is set to the most appropriate level by
setting the Picture Mode to "Auto" with the
in the "Picture" menu. (When you select the input from PC 1 or
PC 2, "Movie" is selected as the default. When you select the
input from COMPONENT, VIDEO 1, VIDEO 2, or TV, "Vivid"
is selected as the default.)
Also, when you set the Picture Mode to "Auto" with the
button, the adjustment bar is displayed. You can adjust the bar
with the M/m buttons. Screen brightness changes according to
the level you set.
Automatic picture quality
adjustment function
button or "Mode"
When the display receives an input signal, it
automatically adjusts the picture's position and
sharpness (phase/pitch), and ensures that a clear
picture appears on the screen.
The factory preset mode
When the display receives an input signal, it automatically
matches the signal to one of the factory preset modes stored in the
display's memory to provide a high quality picture at the center of
the screen. If the input signal matches the factory preset mode, the
picture appears on the screen automatically with the appropriate
default adjustments.
T V / C O M P O N E N T /
V I D E O 1 / V I D E O 2
If input signals do not match one of the factory
preset modes
V i v i d
When the display receives an input signal that does not match one
of the factory preset modes, the automatic picture quality
adjustment function of this display is activated to ensure that a
clear picture always appears on the screen (within the following
S t a n d a r d
display frequency ranges):
Horizontal frequency: 28–86 kHz
E C O
Vertical frequency:
Au t o
1 0 0
Consequently, the first time the display receives input signals that
do not match one of the factory preset modes, the display may
take a longer time than normal to display the picture on the screen.
This adjustment data is automatically stored in memory so that
next time, the display will function in the same way as when the
display receives the signals that match one of the factory preset
modes.
If you adjust the phase, pitch, and picture position
manually
For some input signals, the automatic picture quality adjustment
function of this display may not completely adjust the picture
position, phase, and pitch. In this case, you can set these
adjustments manually (page 24). If you set these adjustments
button or "Mode"
manually, they are stored in memory as user modes and
automatically recalled whenever the display receives the same
input signals.
36
(for PC 2 only)
48–85 Hz (resolution < 1,280 × 1,024)
48–75 Hz (resolution < 1,400 × 1,050)
48–60 Hz (resolution ≤ 1,680 × 1,050)