ROHO QUADTRO SELECT Manual Del Usuario página 8

Placing QUADTRO SELECT or CONTOUR SELECT Cushions On Your Wheelchair
The QUADTRO SELECT or CONTOUR SELECT Cushion should
be placed on your wheelchair seat with the cells pointing
upward. Place the cushion on your chair with the ISOFLO
Memory Control Unit in front.
The cover should be placed on the cushion so the non-skid
material is on the bottom. An opening is sewn into the cover to
accommodate the ISOFLO Memory Control Unit.
Adjusting the QUADTRO SELECT or CONTOUR SELECT Cushion
IMPORTANT! Do Not Skip This Section!
STEP 1: Open air valve by twisting it
counter-clockwise. Check that the
ISOFLO Memory Control Unit's green
knob is pushed toward the center of the
ISOFLO, in the UNLOCKED position.
STEP 3: Remove the pump hose from
the valve and close the valve by
twisting it clockwise.
STEP 2: Attach the rubber hose on
the ROHO Pump to the end of the
valve. Inflate the cushion with the
pump until the cushion begins to arch.
STEP 4: Sit on the cushion with
armrests and footrests properly
adjusted.
(continued on next page)
7
English