Waring Commercial WFP14SCE Manuel De Instrucciones página 5

The Waring WFP14SCE/K/ARG food processor consists of the following standard parts and
accessories (see diagram on next page):
1. Motor base with vertical heavy-duty shaft
2. Two control levers
a. ON ( )
b. OFF-PULSE (
3. Safety interlock (not shown)
Prevents machine from operating until cover is in place
4. Clear work bowl with dry capacity of 14 cups
5. Clear work bowl cover with new seal system for use with larger liquid volumes.
a. Large oval-shaped feed tube for maximum use of cutting surface
b. Large pusher with full-size and reduced-size feed options
c. Small pusher used within the large pusher for smaller vegetables, pepperoni, etc.
Note: This combination pusher allows use of the entire feed tube for large foods and
provides controlled processing for small-diameter foods such as carrots, celery
and pepperoni.
6. Sealed S-blade (cutter blade) to chop, grind, purée and mix: locks in place for liquid processing
and easy pouring.
7. 2 mm, 5⁄64" slicing disc
8. 4 mm, 5/32" shredding disc
9. Detachable stem for use with processing discs
Note that all of the WFP14SCE/K/ARG accessory discs have a unique offset removable
stem. The design of this stem increases the cutting/processing efficiency of these
accessories.
10. Continuous feed chute with handle
11. Continuous feed chute clear cover
12. Slinger for continuous feed chute
THE PARTS
, )
5 5