Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
interior
9/3/06
•
Do not remove the jug from the motor
base while the appliance is in operation.
•
This appliance has a double safety
switch which blocks the mechanism
both if the jug is not in place (or not
properly positioned) on the motor base
or if the lid is not on.
Do not use the jug to switch the
appliance on and off.
•
Do not use the mixer while empty, as
this may damage it.
•
Always use the mixer with the jug lid
properly in place.
•
Do not fill the jug with food at a
temperature of over 80º C.
•
Do not fill the jug to more than 2/3 of its
capacity, as it may overflow.
•
Handle the blade with care in order to
avoid the risk of cuts.
•
Do not insert your hand or any other
object into the jug while the mixer is in
operation. If necessary, disconnect the
appliance and use a spatula to remove
any food stuck to the sides.
4. HOW TO USE THE APPLIANCE
Before using the mixer for the first time,
clean the jug (C), the measurer lid (A) and
the jug lid (B) in warm soapy water. Dry all
parts thoroughly before replacing.
Assembly
All assembly and disassembly operations
should be carried out while the appliance is
unplugged.
Before switching it on for the first time, take
a moment to become familiar with your
mixer by assembling and disassembling it.
•
Place the jug (C) on the motor base (D)
and turn in an anticlockwise direction
until it clicks into place. (Fig. 2)
•
Place the measurer lid (A) in the lid (B)
by inserting its flaps into the lid grooves
and then turning in a clockwise direction
(Fig. 3)
•
Place the ingredients in the jug and fit
the lid into place.
•
To disassemble the mixer, follow the
07:27
Página 7
above steps in reverse order.
Operation
•
Place the assembled mixer on a stable
surface. Make sure that the selector (E)
is set to its '0' position.
•
Plug the appliance into the mains.
•
Chop the products to be liquidised and
place them in the jug. Next add the
liquid, making sure you do not exceed
the maximum level indicated on the jug.
•
Insert the plug into the lid and fit the lid
onto the jug (Fig. 4)
•
For continuous operation, turn the
selector to its '1' '2', '3' or '4' position,
depending on the speed you require.
Speeds '1' and '2' are recommended for
liquids, such as milkshakes, for example.
Speeds '2' and '3', on the other hand, are
recommended for thicker foods, such as
purées.
•
If you want to use the mixer for
momentary operations, turn the selector
to the 'M' position, and alternate it
continuously with the '0' position.
•
Switch the appliance off by turning the
selector to its '0' position. Wait until the
mixer has stopped completely before
removing the jug.
•
Remove the jug by turning it in a
clockwise direction.
•
This product is equipped with two safety
catches, one on the base and the other
on the lid of the recipient. The appliance
will not function if the lid is not in place.
NOTE: Do not use the appliance for more
than three minutes at a time, since this may
overheat the motor. For every three minutes
of use, you should switch the appliance off
for five minutes.
5. PRACTICAL ADVICE
•
For optimum results, it is best to mix
small rather than large quantities of
food, especially when the item in
question is very thick or heavy.
•
Remove the measurer from the lid (A)
to add ingredients to the jug while the
motor is running.
•
To avoid spillage, it is best to insert a
8
Publicidad
Tabla de contenido
