Du Pont WF-IR100 Serie Instrucciones De Instalación página 4

inst_WF-IR100_V2-1-0207R
Installation
Shut off the water supply to the refrigerator. Have a container handy to catch
any water that leaks during installation.
If your refrigerator is gas powered, double check to determine which
lines are gas lines and which are water lines before performing this step.
Select the desired spot to install the filter. Cut the cold water line cleanly. Some
water will likely leak from the line. Make sure that the cut is square and free
from any internal or external burrs.
WF-IR100
12/20/07
1
Step
Shut Off Water
DANGER
EXPLOSION OR FIRE HAZARD
2
Step
Locate Water Tubing
3
12:23 PM Page 4