DeWalt DCF6201 Manual De Instrucciones página 3

Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D WALT TOOL, CALL US TOLL FREE AT: 1-800-4-D
E
(1-800-433-9258).
WARNING: To reduce the risk of injury, read the instruction
manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
WARNING! Read all safety warnings and all instructions
provided with your screwgun (DFC620 or DCF621). Failure
to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Page dimensions: 8.5 x 5.5
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Additional Safety Rules for Collated
Magazine Attachment
• The collated magazine is to only be used with the D
DCF620 or DCF621 cordless screwgun.
• Observe all operating instructions and safety regulations contained in
the manual for the screwgun the magazine accessory is used with.
• Before use, ensure that the magazine accessory is properly
attached to the tool.
• Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
• Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
WALT
E adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the
power tool accidentally
• When driving screws, never reach into the magazine accessory.
Keep hands clear of the advancing mechanism and the spot
where the screw is being driven.
• DO NOT use the magazine accessory as a gripping surface.
• Hold power tool by insulated gripping surfaces, when performing
an operation where the fastener may contact hidden wiring.
Fasteners contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an electric
shock.
• Use only screw strips that are suitable to this magazine. Only insert
screw strips when the screwdriver power is off and the trigger is
locked.
1
WALT
E