Keypad Lock; Infrared Remote Control - DeLonghi HOLMO DRY ELETTRICO Manual De Instrucciones Para El Uso

4.3.4 KEyPaD LOcK

It is possible to lock the keypad to prevent accidental mo-
difications.
To activate the function, press the "Mode"
and "+" buttons together and hold them both
down until the icon
play.
To unlock the keypad, press the same two buttons together
as before.
The "Keypad Lock" icon will no longer appear on the LCD.
ImPORTaNT: The "Keypad Lock" function does
not inhibit the "Standby" button. This is therefore
always active, even when the "Keypad Lock" func-
tion is enabled.
EN
OPERaTION WITh REmOTE cONTROL uNIT
(IF PROvIDED)

4.4 INFRaRED REmOTE cONTROL

The radiator can also be programmed with the in-
frared remotr control, included in the packaging.
The remote control communicates with the appliance by in-
frared rays. For efficient communication, point the remote
control at the receiver on the appliance (Fig. 10).
The distance between the remote control and the receiver
must not be more than 5 m.
Always handle the remote control with great care and place
it within the special plastic container for wall mounting, in-
cluded in the packaging.
Do not drop the remote control nor leave it exposed to direct
sunlight. Do not spray water or other liquids onto the remote
control. Do not rest the remote control on the top of the ra-
diator or near other intense sources of heat.
appears on the dis-
Inserting or replacing the batteries:
•
•
•
When replacing the batteries or disposing of the remote
control, the batteries must be removed and disposed of in
compliance with current legislation as they are harmful to
the environment.
Characteristics:
50
Fig. 10
Remove the cover on the back of the remote control.
Insert two "AAA" LR03 1.5 V alkaline batteries in the
correct position.
Put the cover back.
Size
Power supply
5 m MAX
100 x 42 x 20,5 mm
"AAA" LR03 1.5 V alkaline
batteries