Sabbath Mode - JENN-AIR PROSTYLE 30 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

S
ETUP

Sabbath Mode

The oven is set to shut off after 12 hours if you accidentally
leave it on. The Sabbath Mode overrides the 12-hour shut-off
and can either be set to come on automatically or can be set
manually as desired.
Only Bake or Cook & Hold Bake will operate when the oven is in
Sabbath Mode. All other functions are invalid. If a function other
than Bake or Cook & Hold Bake is in operation when Sabbath
Mode starts, the function will be canceled.
To activate Sabbath Mode:
1. Press Setup pad.
2. Use the down arrow to scroll down.
3. Select Sabbath using the Quickset pads.
4. Select Auto or Manual.
• Auto is used to automatically convert to Sabbath Mode
on Friday at 2 pm and stay in Sabbath mode for 33
hours.
• Manual sets the oven to Sabbath Mode instantly for 72
hours.
5. Select yes or no.
6. Select set.
7. Press Setup pad to exit the Setup menu.
Sabbath Mode Notes:
• The oven must be idle to program Manual Sabbath
Mode.
• Sabbath Mode cannot be turned on if the keypads are
locked out or when the door is locked.
• If the oven is baking when Auto Sabbath Mode starts,
there will be no audible beeps.
• All prompts, messages and beeps are deactivated when
the Sabbath Mode is active.
• If the oven light is desired while in Sabbath Mode, it
must be turned on before the Sabbath Mode is set.
• When the Sabbath Mode is started, the temperature
display will immediately show the set temperature,
rather than the actual oven cavity temperature. No
preheat beep will sound.
• The self-clean cycle and automatic door lock do not
operate during the Sabbath Mode.
• Pressing the CANCEL pad will cancel a Bake cycle,
however the control will stay in the Sabbath Mode.
When Auto or Manual Sabbath Mode starts:
• "Sabbath Mode Enabled" flashes in the display for five
minutes. Bake or Cook & Hold Bake must be programmed
during this time.
To cancel Sabbath Mode:
Press and hold the Setup pad for three seconds.
Temp Adjust
Oven temperatures are carefully tested at the factory. It is
normal to notice some baking time or browning differences
between a new oven and an old one. As ovens get older, the
oven temperature can shift.
You may adjust the oven temperature if you think the oven is
not baking or browning correctly. To decide how much to
change the temperature, set the oven temperature 25° F
higher or lower than the temperature in your recipe, then
bake. The results of the first bake should give you an idea of
how much to adjust the temperature.
To adjust the oven temperature:
1. Press Setup pad.
2. Select the down arrow to scroll to the next screen.
3. Select Temp Adjust using the Quickset pads.
4. Select upper oven or lower oven (select models). "Set
temperature offset using the Upper Set Knob" is displayed
5. Enter the desired temperature change using the Set knob.
The temperature can be increased or decreased up to 35°.
The temperature change is displayed at the top of the
window.
6. Press the Set knob to accept the change.
The oven temperature does not need to be readjusted if there
is a power failure or interruption.
Broiling and cleaning temperatures cannot be adjusted.
208/240V
For improved results when using Bake, the oven can be set
from 240V to 208V if your household is on 208V.
To set the oven to 208V:
1. Press Setup pad.
2. Use the down arrow to scroll to the next screen.
3. Select 208/240V using the Quickset pads.
4. Select 208 or 240.
5. Select Set.
21

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido