Gewiss CHORUS GWA9916 Instrucciones De Uso página 22

results in more rapid regulation (with larger steps in the value). Once the value of the parameter has
been changed, the changed value flashes and the "SET" push-button must be pressed to save the new
setting; a TIMEOUT (10 seconds) with no user acting on the push-buttons cancels the change in the
value and the value before the change is displayed again.
To exit the settings menu, press the "SET" button key for at least 5 seconds or wait for the TIMEOUT
(30 seconds) without pressing any push-button.
The parameters relevant to the control algorithm are:
D
Allows setting of the duration of instantaneous power above the "power threshold +
hysteresis" value before the device initiates the load tripping procedure; the local buzzer
is also activated during the countdown of the duration.
VALUES: from 1 to 240 seconds with step of 1 sec. for fine regulation/10 sec. for rapid
regulation, 1 (default value for IEC 62962 application)
T
Allows the load tripping logic to be set.
VALUES: 1 (from lowest priority to highest priority), 2 (from greatest demand to least
demand, default value), 3 (from least demand to highest demand)
C
Allows the load connecting logic to be set.
VALUES: 1 (as tripping logic), 2 (opposite to tripping logic, default value), 3 (manual
reconnection only)
M
Allows manual load connection priority with respect to the tripping performed by the
device to be activated or deactivated.
VALUES: On, Off (default value)
T
Allows the value of the power threshold used by the load control function to be set.
VALUES: from 0.00 kW to 8.00 kW with step of 0.01 kW for fine regulation/0.10 kW for
rapid regulation, 3.30 kW (default value)
T
Allows the hysteresis value for the power threshold used by the load control function to
be set.
VALUES: from 0.01 kW to 2.50 kW with step of 0.01 kW for fine regulation/0.10 kW for
rapid regulation, 0.50 kW (default value)
pag. 22
URATION BEFORE DISCONNECTION
:
RIPPING LOGIC
:
ONNECTING LOGIC
:
ANUAL PRIORITY
:
HRESHOLD VALUE
HRESHOLD HYSTERESIS
:
: