Names And Function Of Controls On Remote - Nordmende 19 TFT LCD TV Manual De Uso

3.

NAMES AND FUNCTION OF CONTROLS ON REMOTE

POWER
Turns TV ON from STANDBY or from ON to STANDBY
DIRECT DIGIT NUMBER SELECTION Keys ( 0 to 9 )
Selects program number 1 - 200 directly by using direct digit keys
- To select 1 digit program number press desired program number & wait for few seconds
selected program number will appears on screen.
- To select 2 digit or 3 digit program number press 1st,2nd or 3rd digit within 2 sec. After pressing
1 & 2 digit respectively.
PROGRAM UP / DOWN
Navigates up through the valid channels.
Navigates vertically up through the Menu / sub menu.
Used to set the time and Channel name.
SOURCE SELECTION (TV / AV)
Display OSD for source selection.
The input source can be selected with [CH+] / [CH-] keys & press on [VOL+] / [VOL-]keys on
remote
or on TV set as follows:
DISPLAY
Displays present source in formation with details of input signal co nnected.
PICTURE PRESET (
Recall presetted picture settings. Personal, Standard, Bright, Soft can be set.
QUICK VIEW ( Q.V )
Selectes to previously viewed channel.
I / II
I/II is the key for selection of mono, stereo, Dual I, Dual II if input signal is NICAM signal.
RED, GREEN, BLUE, YELLOW
The RED, GREEN, YELLOW & CYAN keys are used for quick access to colour coded pages
transmitted by FAST TEXT broadcast.
SOUND PRESET (
S
Recalls presetted sound settings. Personal, Standard, Music, Hall can be set
MENU
Selected MENU OSD window.
Exit from MENU OSD window when menu window is displayed on screen.
GB
(CH+ / CH-)
TV AV S-VIDEO SCART YPbPr/ YCbCr VGA
| P | )
| S | )
21