Timer - Nordmende 19 TFT LCD TV Manual De Uso

To unlock the channel, follow the above steps by selecting locked channel number, press [MENU] key
then enter 4 digit password by direct (0-9) keys on remote.
NOTE: If you change the default password (0000) we recommend that you should remember and record
your new password.
MENU TIMEOUT
Menu time out decides when OSD should disappear from screen.You can set time from 5 to 60 seconds
as Menu time out time.
Menu time out can be set with [VOL+] / [VOL- ]keys in increments of 5 seconds.
DCDI WINDOWS
DCDI window gives a crisper & more realistic picture by eliminating objectionable stair casing on
diagonal lines, by enhancing picture clarity & realism, by enhancing dynamic contrast,color saturation
correction, flesh tone & green color stretch.
DCDI window has two modes OFF, ON.
DCDI ON will improve the objectionable stair casing on diagonal lines & make images crisper & more
realistic.
TELETEXT LANG. (5)
Teletext Language parameters is used to select teletext language.
1. Press [CH+] / [CH-] keys on remote or TV set to select Teletext Lang. menu .
2. Press [VOL+] / [VOL-] keys on remote or on TV set to set Teletext Lang:
Arabic, West Europe, East Europe, Russian.
3. Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit.
TRANSPARENCY
You can adjust transparency of menu OSD window by using this function ,three modes are available
Opaque, Translucence, Transparent.
Press on remote or VOL+] / [VOL-] keys on TV set to select Opaque, Translucence, Transparent.
8.

TIMER

Select the TIMER menu by pressing MENU and [CH+] / [CH-] keys on remote or on TV set.
Press VOL+ key on remote or V+ key on TV set, [CH+] / [CH-] keys on remote or on TV set to select
sub items in TIMER menu.
TIMER
User can set the time as a Current Time.
1. Press [VOL+] / [VOL-]keys on remote or on TV set to select Timer menu. Hours and minutes can
be set by direct (0-9) keys on remote .
2. Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit.
TIME OFF
Time Off switches the set off after presetted time.
1. Press [CH+] / [CH-] keys on remote or on TV set to select Time Off parameter in Timer menu.
2. Press [VOL+] / [VOL-]keys on remote or on TV set to select Time off. Hours and minutes can be
set by direct (0-9) keys on remote .
3. Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit.
NOTE :
Time Off is deactivated when set is switch to stand by or mains power supply is switched Off.
TIME ON, ON PROGRAM
Time On and On Program switches the set on after presetted time to presetted program.
To execute the Time On and On Program the TV set should be in stand by mode.
1. Press [CH+] / [CH-] keys on remote or on TV set to select Time On or On Program in Timer menu.
2. Press [VOL+] / [VOL-]keys on remote or on TV set to select Time on. Hours and minutes can be
set by direct (0-9) keys on remote .
3. Press [VOL+] / [VOL-]keys on remote or on TV set to set program number in On Program. After
switch off by mains power supply by default on channel will presets to 1 .
4. Press the [ MENU ] key to confirm. Press the [ MENU ] key to exit.
NOTE :
GB
25