Technical Information; Maintenance; Technical Specifications - Chauvet DJ Obey 70 Manual De Usuario

7. Technical Information

Maintenance

Technical
Specifications
Obey™ 70 User Manual Rev. 6
To maintain optimum performance and minimize wear, fixtures should be cleaned
frequently. Usage and environment are contributing factors in determining frequency.
As a general rule, fixtures should be cleaned at least twice a month. Dust build-up
reduces light output performance and can cause overheating. This can lead to
reduced lamp life and increased mechanical wear. Be sure to power off fixture before
conducting maintenance.
1. Unplug fixture from power.
2. Use a vacuum or air compressor and a soft brush to remove dust collected on
external vents.
3. After the fixture is at room temperature, clean all lenses with a mild solution of
glass cleaner or Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue.
4. Apply solution to the cloth or tissue and drag dirt and grime to the outside of the
lens.
5. Gently polish optical surfaces until they are free of haze and lint.
Always dry the parts carefully after cleaning them.
Never spin a fan using compressed air.
Dimensions and Length
Weight
19 in (483 mm)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
External power supply
Parameter
Consumption
Operating/Inrush
current
Thermal
DMX I/O Connectors
Ordering Product Name
Width
7 in (178 mm)
Range
100–240 V, 50/60 Hz
120 V, 60 Hz
<1 W
0.2 A
DMX Refresh Rate
25 Hz
Maximum External Temp.
104 °F (40 °C)
Connector Type
3-pin XLR Sockets
Item Code
Obey™ 70 09080234
Height Weight
2.8 in (71 mm) 7.3 lb (3.3 kg)
Voltage Selection
Auto-ranging
230 V, 50 Hz
<1 W
0.2 A
Channel Range
384
Item Number
OBEY70
Page 17 of 72