Connecting A Stereo Signal Source - Samson Auro D412 Manual Del Usuario

PDF Compressor Pro

Connecting a Stereo Signal Source

Using a Stereo Line Level Signal
• Be sure that the Auro D412/D415 Power switch is set to the of position.
• Turn the LEVEL control fully counterclockwise to the of position.
• Connect the power cable to an AC socket.
• Using standard XLR or 1/4" cables, connect the line level signals from a mixer or keyboard into the
Auro Inputs.
• Switch the Power switch to the ON position.
• Now, run an audio signal from your mixer (like music from a CD) while slowly raising the Auro's
Level control until you have reached the desired level.
14
Auro D412/D415