Samson Studio GT Manual De Instrucciones página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

level can be shown in either percent or
dB, by right-clicking on it (Figure 4).
7. Select the "Playback" tab, then select
the "Level" tab to set the computer's
Master Volume to 100% (Figure 5), and
use the Studio GT's front panel Level
knob to control the overall output from
the speakers and headphones.
Note: Even setting the "Input" volume
at 0 dB, the audio signal is still passing
through the Windows volume control
and is not bit-perfect. You can use a
free program like ASIO4ALL, which is
a hardware independent low latency
ASIO driver for WDM audio devices.
Use the following steps to utilize this
tool:
Go to http://www.asio4all.com and
download the latest available version
of ASIO4ALL.
Install the software, and restart your
computer if instructed to by the
installer.
In your DAW select ASIO4ALL as the
default audio device.
In Sonar LE, for instance, go to Options
Menu>Audio>Advanced tab and set
the Driver Mode to ASIO and press
APPLY. Then go to the General Tab
and press the ASIO Panel button and
the ASIO4ALL panel will open. Select
the Samson StudioGT.
If you have any setup questions
or issues please read the FAQ/
Troubleshooting section at the
ASIO4ALL website.
Owner's Manual
Installing the Studio GT
Studio GT
Figure 4
Figure 5
19

Publicidad

Tabla de contenido
loading

Tabla de contenido